Showing posts with label Boneka. Show all posts
Showing posts with label Boneka. Show all posts

Panduan membuat boneka tangan

Boneka tangan untuk sebagian anak laki-laki mungkin ada yang kurang menyukai ini, akan tetapi apa salahnya apabila anda sebagai orang tua membuatkannya untuk mereka, tidak begitu sulit kok?
Membuat boneka tangan ini juga bisa menggunakan kain bekas di gudang, Saya sendiri sering menggunakan pakaian yang sudah tidak terpakai untuk pembuatan awalnya.
By using clothing or materials used recycled it would be better because I think it will reduce the buildup of waste. Ok let's start making hand puppets using scrap materials. Let's start creating





You will need:



About 30cm by 20cm of felt for the body, any colour you like.
A scrap of felt for a tongue, any colour you like. 
A strip of felt 30cm by 3cm, any colour you like, I like my spotty one.
Some thread to match your body felt.
Black thread.
Two buttons.
A needle.
Some pins.
Scissors
Oh, and a pencil.

Step 1.

Making the body shape.


Fold your felt in half like this and place your hand on it like I have. Three fingers together in the middle, thumb and little finger sticking out a bit.


Draw a line around your hand while it's in this position. I drew around my left hand as I'm right handed.  Leave a gap like I have as you draw around it, you need to do this so that your hand can fit inside. See how I didn't follow the line of my wrist? I just drew straight down from the widest part of my hand. It'll be no problem putting Lionel on with that nice big opening.
Put some pins in and cut out the two body pieces together.



Here it is all cut out. It looks like a cactus at the moment, and it's spiky with pins too, ouch!


Step 2.

Adding the spotty spikes.


Take out the pins and put one piece of the body out of the way. Cut the other body piece in half, don't worry if it goes a bit wobbly, it doesn't matter. This will be the top half of the body.


Draw a spiky line along the length of your felt strip. Make the spikes smaller towards one end, this is his tail.


Lay the spikes on top of one of the halves of the body so that the spikes stick over the edge like in the picture above. I put the spiky strip so that I could just see the body felt peeping up through the valleys of the spikes, then pushed it up a tiny bit.
If you want the lizard to fit your right hand, lay the thumb half down facing the same way as in my picture above. If you want it to fit your left hand, lay the little finger half down instead.


Put the other half on top which ever it is and sandwich the spikes in between. Pin through all three layers to hold them in place.


Using doubled thread, the colour that matches the body colour, sew with running stitch through all three layers from the tail to the nose. I'm just using this orange thread so that you can see what I'm doing. You can hide the knot by starting from the inside and going up through just one layer.



When you get to the nose, tie your knot on the underside like in the picture above. Take the pins out.


Trim the bit left over from the inside of your lizard, it might get in the way later.


Step 3. 

Eyes and tongue.


Sew on the buttons where you'd like the eyes to be.


Using the black thread, sew through just two of the button holes to make his pupils. You can go through any two holes, maybe use different holes for each eye, that might make your lizard look extra funny.


Draw this shape on to the tongue felt. It looks a bit like South Africa's flag, turned around. Cut inside the pencil lines, chopping the marks off.


Take the other half of the body that you set aside and put it flat on the table. This will be the bottom half of the body.
Place the top body on the bottom body just to make sure that you have the bottom half the right way up. The two pieces should line up almost exactly. The tongue needs to be sewn on to the top of the bottom body so it will be in between the two when you are finished. Sew the tongue on with one stitch just to hold it in place for now. 


I made the stitch pretty small so you can't really see it. It doesn't matter too much but it's good to practise this kind of thing, in case you want to hide stitches in the future.


Step 4.

Sewing up the body.


Put the bottom body piece on the table this way up with the whole tongue showing. Place upper body piece on top of it. The tongue end should be hidden in between.
Line up one side of the body pieces from the tongue to the bottom corner and pin together. The other side won't line up as the top body is slightly smaller than the bottom body.


Sew up with over stitch from the bottom corner to the tongue. You might run out of thread on the way up. Don't panic! When you think you are running out, just tie a small knot, cut the thread as close as you can to the knot and get more thread.


When you get to the tongue, sew through it and tie a knot underneath.


Take out your pins and line up the other side of the body, your lizard might curl up a bit as you line the edges up, that's to be expected. Stitch from the tongue down the other side you have just pinned, all the way to the bottom corner again.
Stop there! Don't sew up the hand hole. If you got over excited and sewed up the hand hole, just unpick your stitches back to the corner.


Nah mudah khan sekarang kita tinggal menamai boneka tangan ini, si kadal atau si kelinci ?
Selamat berkreasi yah, jangan lupa kunjungi panduan berikutnya.
Selengkapnya … Panduan membuat boneka tangan

Cara Membuat Boneka Kertas Origami - Versi 1


How to Make Origami Paper Dolls - Version One

Cara Membuat Boneka Kertas Origami - Versi Satu

Coba lihat origami boneka jepang yang teramat manis bukan ??.Ingin membuat sendiri? ingin memberi hadiah buat teman Kamu.
Yuuk ikuti langkah demi langkah cara membuat boneka jepang origami.Kamu akan mempunyai koleksi boneka kimono ini di buku harian, atau untuk menghiasi kado . Have fun!



Ada beberapa hal sebelum kita mulai: 
Saya menggunakan "washi" (kertas Jepang yang terbuat dari serat) . 
Saya menggunakan pola kertas yang didapatkan di toko kado online. 
Tapi jika Kamu mau memakai bahan lain silahkan.


Catatan budaya Jepang: Silahkan lipat lapisan Kimono seperti  (sisi kiri pertama, kemudian sisi kanan). sisi kanan pertama adalah pakaian pemakaman.


Origami berlutut Kimono 

Kamu perlu: 
kertas krep untuk rambut hitam 
- 1 buah cm x 2,5 cm dan 1 potong 4 cm x 3,5 cm cardstock putih untuk kepala 
- sebuah lingkaran sekitar 2,5 cm di (ukuran seperempat) cardstock putih untuk leher 
- persegi panjang  1 / 2 cm x 5 cm kertas untuk kerah 
- tiga 5 cm x 5 cm kotak kertas untuk kimono 
- satu 10 cm x 10 cm kertas persegi untuk underskirt - satu 5cm x 5 cm Lem persegi '


Langkah Satu: Pasang leher dan kerah:

1. Lipat tiga kuadrat dua, menjadi sebuah segitiga. Taruh sedikit lem di tengah-tengah dua segitiga.

2. Lapisan segitiga seperti yang ditunjukkan di atas.

3. Flip segitiga berlapis tumpukan atas dan leher lem ke tengah.

4. Mulailah melipat flap kiri atas di leher di sudut ditampilkan. Ulangi dengan sisi kanan.

5. Ulangi sampai semua lapisan terlipat. Kamu bisa menggunakan sedikit lem untuk mengamankan kerah.
'
Langkah Kedua: Membuat Kimono

1. Lipat 10 x 10 persegi , membuat segitiga. Lipat sudut kiri atas dalam untuk memenuhi tengah sisi kanan segitiga.
2. Ulangi dengan sudut kanan atas.

3. Lipat segitiga dan posisi leher / kerah sepotong. kimono dan menyesuaikan kerah yang diperlukan.dan leher menggunakan setetes lem.

4. Lipat bawah. Lipat dan menyelipkan ke dalam "saku" yuntuk kimono lapisan atas. '
Langkah Tiga: Membuat underskirt ini:

1. Lipat 5cm x 5cm persegi menjadi segitiga. Lipat kembali ke pojok persegi dan ke tengah.Lipat sudut bawah sampai lipatan yang baru dibuat, dan sudut lipat, seperti gambar di atas.

2. Lipat sudut bagian bawah baik dalam dan gunakan lem.

3. Slide underskirt ke dalam saku kimononya, sisakan sekitar 1cm untuk di bagian bawah kimono.
'

Langkah Empat: Membuat gaya rambut 

1. Tempatkan lingkaran karton di atas persegi 4cm, x 3.5cm.

2. Bungkus rambut di sekitar lingkaran dan gunakan lem sedikit saja.

3. rambut Flip kembali seperti yang ditunjukkan pada gambar di atas.

4. Lem poni (yang lebih kecil dari persegi panjang kertas krep.

5. Lipat poni atas belakang kepala dan lem.

Langkah terakhir: 
Lihat hasil akhir boneka kimono, lem jika ada yang masih longgar.
Nah sekarang Kamu bisa memiliki boneka kimono cantik ini

Kamu bisa menghias boneka kimono ini dengan gaya rambut sesuai dengan selera kamu, bisa di tambahkan pita, atau hiasan lain yang menarik hati.
Boneka kimono yang cukup sederhana dalam membuatnya, tapi saya pikir kesederhanaan ini akan membuat lebih indah, iyah khan
Saya harap Kamu setuju dengan ini, dan mengoleksi boneka jepang lainya.
Dan simpan baik- baik boneka jepang kamu, kelak kamu akan membuat boneka jepang keren lain dan dapatkan caranya di blog ini.
Kakak saya sempat membuat puluhan boneka jepang seperti ini dalam sehari dan ini tidak akan menyita waktu.Diantaranya 10 buah menggunakan kertas kado corak batik, Dia bilang akan memberikan ke teman kantor di saat Dia merayakan ulang tahunnya.Wowo sangat kreatif sekali yah ??.
Saya harap kalian membuat percobaan awal menggunakan kertas kado yang banyak di jual di toko alat tulis, dengan warna corak batik akan kelihatan unik sekali.

Silahkan datang kembali minggu depan untuk versi berikutnya yah.
Kalian bisa mengunjungi juga era shop yang menjual Aneka tutorial mulai dari, kesehatan, Panduan Ketrampilan dan Membuat aneka barang, mulai dari perhiasan, paper box, bunga kertas, membuat go kart, mikroskop, teleskop, Ketapel, roket, Militer dll
Tutorial membuat Aneka Barang Uniq dan Cantik
Selengkapnya … Cara Membuat Boneka Kertas Origami - Versi 1